Prepare SMPL models

1. Prepare SMPL models
   1. SMPL model
   2. MANO + SMPL+H
   3. FLAME
   4. SMPL-X
   5. VPoser
   6. Adam

---

After we build EasyMocap v0.1, some models were updated. So you should make sure you have registered and downloaded the newest model.

SMPL model

To download the SMPL model go to this(version 1.1.0) project website and register to get access to the downloads section. After the downloading, place and extract it at data/bodymodels/:

data/bodymodels
└── SMPL_python_v.1.1.0
    └── smpl
        ├── __init__.py
        ├── models
        │   ├── basicmodel_f_lbs_10_207_0_v1.1.0.pkl
        │   ├── basicmodel_m_lbs_10_207_0_v1.1.0.pkl
        │   └── basicmodel_neutral_lbs_10_207_0_v1.1.0.pkl
        └── smpl_webuser

To check the model, please install and use our 3D visualization tool:

python3 apps/vis3d/vis_smpl.py --cfg config/model/smpl.yml

MANO + SMPL+H

To download the SMPL+H model go to this project website and register to get access to the downloads section. Download the newest mano model (version 1.2) and place it into data/bodymodels/manov1.2. Download the newest SMPL+H model

data/bodymodels/
├── manov1.2
│   ├── MANO_LEFT.pkl
│   └── MANO_RIGHT.pkl
└── smplhv1.2
    ├── female
    │   └── model.npz
    ├── info.txt
    ├── LICENSE.txt
    ├── male
    │   └── model.npz
    └── neutral
        └── model.npz

To check the model, please use our 3D visualization tool:

# test the MANO model
python3 apps/vis3d/vis_smpl.py --cfg config/model/mano.yml
# test the SMPL+H model
python3 apps/vis3d/vis_smpl.py --cfg config/model/smplh.yml

FLAME

TODO: Download

data/bodymodels/FLAME2020
├── flame_dynamic_embedding.npy
├── FLAME_FEMALE.pkl
├── FLAME_MALE.pkl
├── FLAME_NEUTRAL.pkl
├── flame_static_embedding.pkl
└── Readme.pd

To check the model, please use our 3D visualization tool:

python3 apps/vis3d/vis_smpl.py --cfg config/model/flame.yml

SMPL-X

To download the SMPL-X model go to this project website and register to get access to the downloads section.

Download the SMPL-X v1.1.

TODO

VPoser

Register to SMPL-X project page and download VPoser v0.2.

data/bodymodels/vposer_v02
├── snapshots
│   ├── V02_05_epoch=08_val_loss=0.03.ckpt
│   └── V02_05_epoch=13_val_loss=0.03.ckpt
├── V02_05.log
└── V02_05.yaml

Test the model:

python3 apps/vis3d/vis_smpl.py --cfg config/model/smpl_vposer.yml
python3 apps/vis3d/vis_smpl.py --cfg config/model/smplh_vposer.yml

Adam

TODO